incoloy800, incoloy800H (UNS N08810), incoloy800HT (UNS N08811)
incoloy800, incoloy800H (UNS N08810), incoloy800HT (UNS N08811),
INCOLOY 800/800h / 800HT band INCOLOY 800/800h / 800HT, INCOLOY 800/800h / 800HT buizen (gelaste na naadloze buizen), INCOLOY 800/800h / 800HT platen, INCOLOY800/800h / 800HT draad, Ingekleurd 800/800h / 800HT smeedwerk, staven,
Incoloy 800(UNS N08800) , Nickel Alloy 800,Inconel 800, W.Nr 1.4876
Incoloy 800H(UNS N08810), Nickel Alloy 800H, Inconel 800H, W.Nr 1.4958
Incoloy 800HT (UNS No8811) nickelIncoloy 800HT, W.Nr 1.4959
Incoloy Alloy 800 bụ ihe a na-ejikarị eme ihe maka akụrụngwa nke ga-enwerịrị ike dị elu ma na-eguzogide oxidation, carburizing na mmetụta ndị ọzọ na-emerụ ahụ nke ikpo ọkụ dị elu (maka ngwa okpomọkụ dị elu chọrọ ezigbo creep na fracture properties, jiri Incoloy Alloy 800H na 800HT).
Isi ihe dị iche n'etiti alloys 800, 800H na 800HT bụ n'ibu Njirimara.Ọdịiche dị iche iche sitere na ihe mgbochi amachibidoro nke alloys 800H na 800HT yana anneal okpomọkụ dị elu ejiri maka alloys ndị a.N'ozuzu, alloy 800 nwere ihe arụ ọrụ dị elu na ụlọ okpomọkụ yana n'oge obere oge ikpughe na okpomọkụ dị elu, ebe alloys 800H na 800HT nwere ikike dị elu na mgbawa n'oge ikpughe okpomọkụ dị elu.
Incoloy 800/800H/800HT Ngwakọta kemịkalụ
| Alloy | % | Ni | Cr | Fe | C | Mn | Si | Cu | S | Al | Ti | Al+Ti |
| INkoloy 800 | Min. | 30 | 19 | itule | - | - | - | - | - | 0.15 | 0.15 | 0.3 |
| Oke. | 35 | 23 | 0.10 | 1.5 | 1 | 0.75 | 0.015 | 0.60 | 0.60 | 1.2 | ||
| Inkoloy 800H | Min. | 30 | 19 | itule | 0.05 | - | - | - | - | 0.15 | 0.15 | 0.3 |
| Oke. | 35 | 23 | 0.10 | 1.5 | 1 | 0.75 | 0.015 | 0.60 | 0.60 | 1.2 | ||
| INkoloy 800HT | Min. | 30 | 19 | itule | 0.06 | - | - | - | - | 0.25 | 0.25 | 0.85 |
| Oke. | 35 | 23 | 0.10 | 1.5 | 1 | 0.75 | 0.015 | 0.60 | 0.60 | 1.2 |
Njirimara anụ ahụ Incoloy 800/800H/800HT
| Njupụta (g/cm3) | Ebe mgbaze (℃) | Modulu nke na-agbanwe agbanwe (GPa) | Thermal conductivity (λ/(W(m•℃)) | Ọnụọgụ mgbasawanye okpomọkụ (24-100°C)(m/m Celsius) | Ọnọdụ okpomọkụ na-arụ ọrụ (°C) |
| 7.94 | 1357-1385 | 196 | 1.28 | 14.2 | -200 ~ +1,100 |
Njirimara arụrụ arụ Incoloy 800/800H/800HT
| Alloy | Ụdị | Ọnọdụ | Ike tensile kacha ksi (MPa) | Mpụta ike 0.2% offset ksi (MPa) | Ogologo oge na 2″ ma ọ bụ 4D, pasent |
| 800 | Mpempe akwụkwọ, efere | Annealed | 85 (586) | 40 (276) | 43 |
| 800 | Mpempe akwụkwọ, efere Mwepu, mmanya | Annealed | 75 (520)* | 30 (205)* | 30* |
| 800H | Mpempe akwụkwọ, efere | SHT | 80 (552) | 35 (241) | 47 |
| 800H | Mpempe akwụkwọ, efere Mwepu, mmanya | SHT | 65 (450)* | 25 (170)* | 30* |
Ụkpụrụ na nkọwapụta Incoloy 800/800H / 800HT
| Ogwe/Ogwe | Waya | Eriri / eriri igwe | Mpempe akwụkwọ/efere | Pipe/Tube | Kwesịrị ekwesị |
| ASTM B408 & SB 408 | ASTM B408, AMS 5766, ISO 9723, ISO 9724, BS 3076NA15, BS 3075NA15, EN 10095, VdTüV 412 & 434, AWS A5.11 ENiCrFe-2, AWS A5.14 | ASTM B 409/B 906, ASME SB 409/SB 906, ASME Code Case 1325, 2339 | ASTM B409, AMS 5877, BS 3072NA15, BS 3073NA15, VdTüV 412 & 434, DIN 17460, EN 10028-7, EN 10095 | ASTM B163/SB 163 | ASTM B366 |
Incoloy 800/800H/800HT dị na Sekonic Metals
Incoloy 800/800H/800HT Ogwe & mkpanaka
Ogwe okirikiri / Ogwe Flat / Hex Ogwe, Size Si 8.0mm-320mm, Eji maka bolts, fastners na akụkụ ndị ọzọ mapụtara
Incoloy 800/800H/800HT waya
Na-eweta na ịgbado ọkụ waya na mmiri waya na eriri igwe ụdị na bee ogologo.
Incoloy 800/800H/800HT Flange
Enwere ike imepụta nha ọkọlọtọ na nha ahaziri iche site na iji nnabata ziri ezi
Incoloy800/800H/800HT mpempe akwụkwọ & efere
Obosara ruo 1500mm na ogologo ruo 6000mm, ọkpụrụkpụ si 0.1mm ka 100mm.
Incoloy 800/800H/800HT enweghị nkebi tube & Welded ọkpọkọ
Ụkpụrụ nha na nha ahaziri iche nwere ike ịmepụta site na anyị na obere ntachi obi
Incoloy 800/800H/800HT eriri & eriri igwe
Ọnọdụ dị nro na ọnọdụ siri ike na elu AB na-egbuke egbuke, obosara ruru 1000mm
Incoloy 800/800H/800HT fasteners
Alloy ihe n'ụdị nke bolts, kposara, flanges na ndị ọzọ ngwa ngwa, dị ka ahịa nkọwapụta.
Kedu ihe kpatara Incoloy 800/800H/800HT?
• Magburu onwe corrosion eguzogide na mmiri mgbasa ozi nke oké elu okpomọkụ nke 500 ℃.
• Ezigbo nguzogide corrosion nrụgide
• Nrụpụta nke ọma
• Ike na-akpụ akpụ dị elu
• Ezigbo mma na-eguzogide oxidation
• Ezigbo iguzogide gas combustion
• Ezigbo mma na-eguzogide carburization
• Nguzogide dị mma na ntinye nitrogen
• Nkwụsi ike nhazi dị mma na oke okpomọkụ
• Ezi weldability
Incoloy 800/800H/800HT ubi ngwa:
• Ethylene ọkụ quench ji esi mmiri ọkụ • Hydrocarbon cracking
• Valves, ihe nrụnye na ihe ndị ọzọ ekpughere na mwakpo mmebi sitere na 1100-1800F.
• Igwe ọkụ ụlọ ọrụ • akụrụngwa na-ekpo ọkụ
• Nhazi kemịkalụ na mmanụ petrochemical • Ndị na-agbanwe ọkụ
• Super-heater na re-heater na ike osisi • Nrụgide arịa
INCOLOY 800/800h / 800HT alle drie hebben nken zeer vergelijkbare chemische samenstelling, nke na-eme ka ọ bụrụ ihe na-eme ka ọ bụrụ ihe eji eme ihe, oxidatie, corrosie door stikstofhoudende media, evenals weerstand tegen afwisshende na-emepụta ihe na-emepụta ihe, oxidatie ya n'ụzọ zuru ezu hoge okpomọkụ.Maar door het verschil in (Al+Ti) inhoud van de drie, waardoor de omgeving waarin de drie materialen worden gebruikt verschillend is, wordt de specifieke prestatie geleverd: INCOLOY 800 komt uit bij onder nul, bij en kamertemperatun okpomọkụ van 600 graden celsius.INCOLOY 800H heeft een zeer goede treksterkte boven 600 graden c omdat het (Al+Ti) gehalte niet hoger is dan 0,7% en heeft nog steeds een goede taaiheid bij langdurige werkzaamhe0H0H Nke a na-eme ka okpomọkụ dị elu karịa 700 graden celsius.
INCOLOY 800HT dị na het algemeen beschikbaar als alternatief voor INCOLOY 800/800h.Nke a bụ ihe na-eme ka ọ bụrụ ihe na-eme ka ọ dịkwuo mma, na-eme ka ọ bụrụ ihe onwunwe,
