Nickel ịgbado ọkụ Waya ERNiCu-7 Monel 400/K500 ịgbado ọkụ waya

Nkọwa ngwaahịa

/haynes-25-alloy-l605-co350-ịgbado ọkụ-wire-ngwaahịa/

ErNicu-7 (Monel 400/K500) Waya Welding

♦Aha ihe ịgbado ọkụ: nickel welding waya, ErNiCu-7, Monel 400/K500 Welding Waya

♦MOQ: 15kg

♦Ụdị: MIG (15kgs / spool), TIG (5kgs / igbe)

♦Nha: dayameta 0.01mm-8.0mm

♦Nha nkịtị: 0.8MM / 1.0MM / 1.2MM / 1.6MM / 2.4MM / 3.2MM / 3.8MM / 4.0MM / 5.0MM

♦Ụkpụrụ: Dabara na Asambodo AWS A5.14 ASME SFA A5.14

Kpọtụrụ anyị ka ị mụtakwuo!

ErNiCu-7 Dabere ihe onwunwe bụ Monel 400 na Monel K500, Nke a ịgbado ọkụ waya bụ tumadi na-eji maka ịgbado ọkụ MONEL400 alloy, MONELR404 alloy na MOENLK-500 alloy site tungsten inert-gas ịgbado ọkụ, MGW na submerged arc ịgbado ọkụ, na nwekwara ike a ga-eji ígwè n'elu ihu weld. site na MGW na ịgbado ọkụ arc miri emi.

A na-atụ aro ka iji mkpuchi waya Erni-1 nickel maka ọnọdụ ịgbado ọkụ gas.

Ihe mejupụtara ERNiCu-7 Chemical

C	Al	Ni	Si	Mn	P	S	Fe	Cu	Ti	Ndị ọzọ
≤0.15	≤1.25	62.0-69.0	≤1.25	≤4.0	≤0.02	≤0.015	≤2.5	Bal	1.5-3.0	≤0.50

Ụdị ịgbado ọkụ ERNiCu-7

Dayameta		Usoro	Volt	Amps	Gas na-echebe
In	mm	Usoro	Volt	Amps	Gas na-echebe
0,035	0.9	GMAW	26-29	150-190	75% argon+25% Helium
0,045	1.2	GMAW	28-32	180-220	75% argon+25% Helium
1/16	1.6	GMAW	29-33	200-250	75% argon+25% Helium
0,035	0.9	GTAW	12-15	60-90	100% Argon
0,045	1.2	GTAW	13-16	80-110	100% Argon
1/16	1.6	GTAW	14-18	90-130	100% Argon
3/32	2.4	GTAW	15-20	120-175	100% Argon
1/8	3.2	GTAW	15-20	150-220	100% Argon
3/32	2.4	SAW	28-30	275-350	Ọ nwere ike iji flux dabara adaba
1/8	3.2	SAW	29-32	350-450	Ọ nwere ike iji flux dabara adaba
5/32	4.0	SAW	30-33	400-550	Ọ nwere ike iji flux dabara adaba

ERNiCu-7 Mechanical Properties

Ọnọdụ	Ike tensile MPa (ksi)	Mpụta Ike MPa (ksi)	Mgbatị%
AWS reauirement	480(70) Na-ahụkarị	Akọwapụtaghị ya	Akọwapụtaghị ya
Nsonaazụ a na-ahụkarị dị ka welded	530 (77)	360 (53)	34

Gịnị kpatara ERNiCu-7?

•Ọ dịghị preheat chọrọ, kacha interpass okpomọkụ 150 ℃ na ọ dịghị PwHT chọrọ
•Ngwa ịgbado ọkụ dị iche iche gụnyere ijikọ alloys na Nickel 200 na ọla kọpa-nickel alloys-
•A na-eji ya eme ihe na ngwa mmiri n'ihi ezigbo nguzogide ọ na-emebi mmetụta nke mmiri oké osimiri na mmiri brackish.
•Enwere ike iji MIG machie na nchara mgbe oyi akwa mbụ nwere nickel 208