Igwe anaghị agba nchara 15-5ph
Aha ahia ndị nkịtị: 15-5, 15-5PH, UNS 15500 , XM-12 , W.Nr 1.4545
15-5pH ígwè alloy e mere iji nwee ike ka ukwuu karịa 17-4 PH.15-5 alloy bụ martensitic na nhazi na ọnọdụ annealed ma na-ewusi ya ike site na ọgwụgwọ okpomọkụ dịtụ ala nke na-ebuli ọla kọpa nwere oge na alloy.A na-akpọkwa 15-5 dị ka XM-12 na nkọwa ụfọdụ
| C | Cr | Ni | Si | Mn | P | S | Cu | Nb |
| ≤0.07 | 14.0-15.5 | 3.5-5.5 | ≤1.0 | ≤1.0 | ≤0.04 | ≤0.03 | 2.5-4.5 | 0.15-0.45 |
| Njupụta | Eletriki resistivity | Kpọmkwem ikike | Ọnụọgụ mgbasawanye okpomọkụ |
| 7.8 | 0.98 | 460 | 10.8 |
| Ọnọdụ | b/N/mm2 | б0.2/N/mm2 | 5/% | ψ | HRC | |
| Mmiri ozuzo | 480 ℃ afọ | 1310 | 1180 | 10 | 35 | ≥40 |
| 550 ℃ afọ | 1070 | 1000 | 12 | 45 | ≥35 | |
| 580 ℃ afọ | 1000 | 865 | 13 | 45 | ≥31 | |
| 620 ℃ afọ | 930 | 725 | 16 | 50 | ≥28 | |
Steel 15-5PH (Xm-12) Ụkpụrụ na nkọwapụta
AMS 5659, AMS 5862, ASTM-A564 (XM-12), BMS 7-240 (Boeing), W.Nr./EN 1.4545
Ngwa igwe 15-5PH (Xm-12) dị na Sekonic Metals
Igwe igwe na mkpanaka 15-5PH
Ogwe okirikiri/Ogwe dị larịị/Ogwe hex,Size Site 8.0mm-320mm, Eji maka bolts, fastners na ndị ọzọ akụkụ ahụ mapụtara
Steel 15-5PH waya
Na-eweta na ịgbado ọkụ waya na mmiri waya na eriri igwe ụdị na bee ogologo.
Steel 15-5PH mpempe akwụkwọ & efere
Obosara ruo 1500mm na ogologo ruo 6000mm, ọkpụrụkpụ si 0.1mm ka 100mm.
Igwe anaghị agba nchara 15-5PH tube & ọkpọkọ welded
Ụkpụrụ nha na nha ahaziri iche nwere ike ịmepụta site na anyị na obere ntachi obi
Steel 15-5PH eriri & eriri igwe
Ọnọdụ dị nro na ọnọdụ siri ike na elu AB na-egbuke egbuke, obosara ruru 1000mm
Steel 15-5PH Gasket / mgbanaka
Enwere ike ịhazi akụkụ ya site na iji elu na-egbuke egbuke na nnabata ziri ezi.
Gịnị kpatara ígwè 15-5PH (Xm-12)?
•Ịkwụsị mmiri ozuzo
•Ike dị elu
•Nguzogide corrosion na-agafeghị oke ruo 600°F
Steel 15-5PH (Xm-12) ubi ngwa:
•Ngwa ikuku
•Ngwa kemịkalụ na petrochemical
•Pulp na akwụkwọ
•Nhazi nri
