Waya ịgbado ọkụ nickel, ErNiCu-7, Monel 400/K500 Welding Waya
Waya ịgbado ọkụ nickel, ErNiCu-7, Monel 400/K500 Welding Waya,
AWS A5.14 ErNiCu7, Ego 400/K500 Nickel Welding, nickel ịgbado ọkụ waya,
ErNicu-7 (Monel 400/K500) Waya Welding
♦Aha ihe ịgbado ọkụ: nickel welding waya, ErNiCu-7, Monel 400/K500 Welding Waya
♦MOQ: 15kg
♦Ụdị: MIG (15kgs / spool), TIG (5kgs / igbe)
♦Nha: dayameta 0.01mm-8.0mm
♦Nha nkịtị: 0.8MM / 1.0MM / 1.2MM / 1.6MM / 2.4MM / 3.2MM / 3.8MM / 4.0MM / 5.0MM
♦Ụkpụrụ: Dabara na Asambodo AWS A5.14 ASME SFA A5.14
ErNiCu-7 Dabere ihe onwunwe bụ Monel 400 na Monel K500, Nke a ịgbado ọkụ waya bụ tumadi na-eji maka ịgbado ọkụ MONEL400 alloy, MONELR404 alloy na MOENLK-500 alloy site tungsten inert-gas ịgbado ọkụ, MGW na submerged arc ịgbado ọkụ, na nwekwara ike a ga-eji ígwè n'elu ihu weld. site na MGW na ịgbado ọkụ arc miri emi.
A na-atụ aro ka iji mkpuchi waya Erni-1 nickel maka ọnọdụ ịgbado ọkụ gas.
Ihe mejupụtara ERNiCu-7 Chemical
| C | Al | Ni | Si | Mn | P | S | Fe | Cu | Ti | Ndị ọzọ |
| ≤0.15 | ≤1.25 | 62.0-69.0 | ≤1.25 | ≤4.0 | ≤0.02 | ≤0.015 | ≤2.5 | Bal | 1.5-3.0 | ≤0.50 |
Ụdị ịgbado ọkụ ERNiCu-7
| Dayameta | Usoro | Volt | Amps | Gas na-echebe | |
| In | mm | ||||
| 0,035 | 0.9 | GMAW | 26-29 | 150-190 | 75% argon+25% Helium |
| 0,045 | 1.2 | GMAW | 28-32 | 180-220 | 75% argon+25% Helium |
| 1/16 | 1.6 | GMAW | 29-33 | 200-250 | 75% argon+25% Helium |
| 0,035 | 0.9 | GTAW | 12-15 | 60-90 | 100% Argon |
| 0,045 | 1.2 | GTAW | 13-16 | 80-110 | 100% Argon |
| 1/16 | 1.6 | GTAW | 14-18 | 90-130 | 100% Argon |
| 3/32 | 2.4 | GTAW | 15-20 | 120-175 | 100% Argon |
| 1/8 | 3.2 | GTAW | 15-20 | 150-220 | 100% Argon |
| 3/32 | 2.4 | SAW | 28-30 | 275-350 | Ọ nwere ike iji flux dabara adaba |
| 1/8 | 3.2 | SAW | 29-32 | 350-450 | Ọ nwere ike iji flux dabara adaba |
| 5/32 | 4.0 | SAW | 30-33 | 400-550 | Ọ nwere ike iji flux dabara adaba |
ERNiCu-7 Mechanical Properties
| Ọnọdụ | Ike tensile MPa (ksi) | Mpụta Ike MPa (ksi) | Mgbatị% |
| AWS reauirement | 480(70) Na-ahụkarị | Akọwapụtaghị ya | Akọwapụtaghị ya |
| Nsonaazụ a na-ahụkarị dị ka welded | 530 (77) | 360 (53) | 34 |
Gịnị kpatara ERNiCu-7?
•Ọ dịghị preheat chọrọ, kacha interpass okpomọkụ 150 ℃ na ọ dịghị PwHT chọrọ
•Ngwa ịgbado ọkụ dị iche iche gụnyere ijikọ alloys na Nickel 200 na ọla kọpa-nickel alloys-
•A na-eji ya eme ihe na ngwa mmiri n'ihi ezigbo nguzogide ọ na-emebi mmetụta nke mmiri oké osimiri na mmiri brackish.
•Enwere ike iji MIG machie na nchara mgbe oyi akwa mbụ nwere nickel 208
MOQ: 15kg
Ụdị: MIG (15kgs / spool), TIG (5kgs / igbe)
Nha: Dayameta 0.01mm-8.0mm Nha a na-ahụkarị:0.8MM/1.0MM/1.2MM/1.6MM/2.4MM/3.2MM/3.8MM/4.0MM/5.0MM
Ụkpụrụ: Dabara na Asambodo AWS A5.14 ASME SFA A5.14
