Incoloy800/800H/800HT rụpụtara
Incoloy 800(UNS N08800), Nickel Alloy 800,Inconel 800, W.Nr 1.4876
Incoloy 800H(UNS N08810), Nickel Alloy 800H, Inconel 800H, W.Nr 1.4958
Incoloy 800HT (UNS No8811) nickelIncoloy 800HT, W.Nr 1.4959
Incoloy Alloy 800 bụ ihe a na-ejikarị eme ihe maka akụrụngwa nke ga-enwerịrị ike dị elu ma na-eguzogide oxidation, carburizing na mmetụta ndị ọzọ na-emerụ ahụ nke ikpo ọkụ dị elu (maka ngwa okpomọkụ dị elu chọrọ ezigbo creep na fracture properties, jiri Incoloy Alloy 800H na 800HT).
| Alloy | % | Ni | Cr | Fe | C | Mn | Si | Cu | S | Al | Ti | Al+Ti |
| INkoloy 800 | Min. | 30 | 19 | itule | - | - | - | - | - | 0.15 | 0.15 | 0.3 |
| Oke. | 35 | 23 | 0.10 | 1.5 | 1 | 0.75 | 0.015 | 0.60 | 0.60 | 1.2 | ||
| Inkoloy 800H | Min. | 30 | 19 | itule | 0.05 | - | - | - | - | 0.15 | 0.15 | 0.3 |
| Oke. | 35 | 23 | 0.10 | 1.5 | 1 | 0.75 | 0.015 | 0.60 | 0.60 | 1.2 | ||
| INkoloy 800HT | Min. | 30 | 19 | itule | 0.06 | - | - | - | - | 0.25 | 0.25 | 0.85 |
| Oke. | 35 | 23 | 0.10 | 1.5 | 1 | 0.75 | 0.015 | 0.60 | 0.60 | 1.2 |
| Njupụta (g/cm3) | Ebe mgbaze (℃) | Modulu nke na-agbanwe agbanwe (GPa) | Thermal conductivity (λ/(W(m•℃)) | Ọnụọgụ mgbasawanye okpomọkụ (24-100°C)(m/m Celsius) | Ọnọdụ okpomọkụ na-arụ ọrụ (°C) |
| 7.94 | 1357-1385 | 196 | 1.28 | 14.2 | -200 ~ +1,100 |
| Alloy | Ụdị | Ọnọdụ | Ike tensile kacha ksi (MPa) | Mpụta ike 0.2% nkwụsịksi (MPa) | Ogologo oge n'ime 2"ma ọ bụ 4D, pasent |
| 800 | Mpempe akwụkwọ, efere | Annealed | 85 (586) | 40 (276) | 43 |
| 800 | Mpempe akwụkwọ, efere Mwepu, mmanya | Annealed | 75 (520)* | 30 (205)* | 30* |
| 800H | Mpempe akwụkwọ, efere | SHT | 80 (552) | 35 (241) | 47 |
| 800H | Mpempe akwụkwọ, efere Mwepu, mmanya | SHT | 65 (450)* | 25 (170)* | 30* |
Ụkpụrụ na nkọwapụta Incoloy 800/800H / 800HT
| Ogwe/Ogwe | Waya | Eriri / eriri igwe | Mpempe akwụkwọ/efere | Pipe/Tube | Kwesịrị ekwesị |
| ASTM B408 & SB 408 | ASTM B408, AMS 5766, ISO 9723, ISO 9724, BS 3076NA15, BS 3075NA15, EN 10095, VdTüV 412 & 434, AWS A5.11 ENiCrFe-2, AWS A5.14 | ASTM B 409/B 906, ASME SB 409/SB 906, ASME Code Case 1325, 2339 | ASTM B409, AMS 5877, BS 3072NA15, BS 3073NA15, VdTüV 412 & 434, DIN 17460, EN 10028-7, EN 10095 | ASTM B163/SB 163 | ASTM B366 |
Incoloy 800/800H/800HT dị na Sekonic Metals
Incoloy 800/800H/800HT Ogwe & mkpanaka
Ogwe okirikiri/Ogwe dị larịị/Ogwe hex,Size Site 8.0mm-320mm, Eji maka bolts, fastners na ndị ọzọ akụkụ ahụ mapụtara
Incoloy 800/800H/800HT waya
Na-eweta na ịgbado ọkụ waya na mmiri waya na eriri igwe ụdị na bee ogologo.
Incoloy 800/800H/800HT Flange
Enwere ike imepụta nha ọkọlọtọ na nha ahaziri iche site na iji nnabata ziri ezi
Incoloy800/800H/800HT mpempe akwụkwọ & efere
Obosara ruo 1500mm na ogologo ruo 6000mm, ọkpụrụkpụ si 0.1mm ka 100mm.
Incoloy 800/800H/800HT enweghị nkebi tube & Welded ọkpọkọ
Ụkpụrụ nha na nha ahaziri iche nwere ike ịmepụta site na anyị na obere ntachi obi
Incoloy 800/800H/800HT eriri & eriri igwe
Ọnọdụ dị nro na ọnọdụ siri ike na elu AB na-egbuke egbuke, obosara ruru 1000mm
Incoloy 800/800H/800HT fasteners
Alloy ihe n'ụdị nke bolts, kposara, flanges na ndị ọzọ ngwa ngwa, dị ka ahịa nkọwapụta.
Kedu ihe kpatara Incoloy 800/800H/800HT?
• Magburu onwe corrosion eguzogide na mmiri mgbasa ozi nke oké elu okpomọkụ nke 500 ℃.
• Ezigbo nguzogide corrosion nrụgide
• Nrụpụta nke ọma
• Ike na-akpụ akpụ dị elu
• Ezigbo mma na-eguzogide oxidation
• Ezigbo iguzogide gas combustion
• Ezigbo mma na-eguzogide carburization
• Nguzogide dị mma na ntinye nitrogen
• Nkwụsi ike nhazi dị mma na oke okpomọkụ
• Ezi weldability
Incoloy 800/800H/800HT ubi ngwa:
• Ethylene ọkụ na-emenyụ ọkụ ọkụ• Hydrocarbon mgbawa
• Valves, ihe nrụnye na ihe ndị ọzọ ekpughere na mwakpo mmebi sitere na 1100-1800F.
• Igwe ọkụ ụlọ ọrụ• Akụrụngwa na-ekpo ọkụ
• Nhazi kemịkalụ na mmanụ petrochemical • Ndị na-agbanwe ọkụ
• Super-heater na re-heater na ike osisi • Nrụgide arịa
