602CA
602 CA,
,
Azụmahịa nkịtị: 602 CA;alloy602 СА;UNS N06025;W.Nr 2.4633
Inconel 602 CA alloy bụ ihe kacha oxidation na-eguzogide / ike dị elu nickel alloy dị.Ọ nwere ike iji oke okpomọkụ ruo na gafere 2200°F (1200°C).Maka ngwa nhazi okpomọkụ ebe mmetọ ngwaahịa dị ntakịrị, nguzogide oxidation/scaling nke Inconel 602 CA bụ ihe na-achọsi ike.Ọdịnaya chromium dị elu, yana mgbakwunye aluminom na yttrium, na-enye ohere ka alloy mepụta nha oxide na-ejidesi ike.
Ọdịnaya carbon dị oke elu jikọtara ya na mgbakwunye alloying nke titanium na zirconium na-ebute ike mgbawa dị elu.Inconel 602 CA na-enye 150% ike nke nickel alloys ndị ọzọ a na-ejikarị dị ka alloy 600.
Inconel 602CA Chemical mejupụtara
| Alloy | % | Cr | Cu | Ni | P | S | Fe | C | Al | Ti | Y | Zr | Si | Mn |
| 602CA | Min. | 24.0 | - | itule | - | - | 8.0 | 0.15 | 1.8 | 0.1 | 0.05 | 0.01 | - | - |
| Oke. | 26.0 | 0.1 | 0.02 | 0.01 | 11.0 | 0.25 | 2.4 | 0.2 | 0.12 | 0.1 | 0.5 | 0.15 |
Inconel 602CA Njirimara anụ ahụ
| Njupụta | 0.285 lb / n'ime 3 |
| Ebe mgbaze | 2350 – 2550°F |
Inconel 602CA Mechanical Njirimara
Njirimara Tensile nke nnọchi anya
| Okpomọkụ, Celsius F | 68 | 1000 | 1500 | 1600 | 1800 | 2000 | 2200 |
| Ike tensile kacha elu, ksi | 105 | 93.4 | 41.2 | 32.8 | 17.1 | 13 | 5.8 |
| 0.2% Ike Mpụta, ksi | 50.5 | 38.3 | 34.8 | 28.7 | 15.2 | 11.6 | 5.0 |
| Mgbatị, % | 38 | 43 | 78 | 82 | 78 | 85 | 96 |
Ụdị ihe na-akpụ akpụ- Njirimara mgbawa
| Okpomọkụ, °F | 1400 | 1600 | 1800 | 1900 | 2000 | 2100 |
| Opekempe 0.0001% / elekere, ksi | 9.4 | 2.4 | 0.96 | 0.59 | - | - |
| Ike mgbawa elekere 10,000, ksi | 11.3 | 3.2 | 1.5 | 0.99 | 0.67 | 0.44 |
Inconel 602CA Ụkpụrụ na nkọwapụta
Koodu ASME Case 2359, ASME SB 166, ASME SB 168, ASTM B 166, ASTM B 168, ERNiCrFe-12, UNS N06025, W. Nr./EN 2.4633
| Ogwe/Ogwe | Waya | Eriri / eriri igwe | Mpempe akwụkwọ/efere |
| ASTM B166; ASME SB166 | ASTM B166; ASME SB166 | ASTM B168; ASME SB168 | ASTM B168; ASME SB168 |
Ngwa inconel 602CA dị na Sekonic Metals
Inconel 602CA Ogwe & mkpanaka
Ogwe okirikiri / Ogwe Flat / Hex Ogwe, Size Si 8.0mm-320mm, Eji maka bolts, fastners na akụkụ ndị ọzọ mapụtara
Inconel 602CA ịgbado ọkụ waya & mmiri waya
Na-eweta na ịgbado ọkụ waya na mmiri waya na eriri igwe ụdị na bee ogologo.
Inconel 602CA mpempe akwụkwọ & efere
Obosara ruo 1500mm na ogologo ruo 6000mm, ọkpụrụkpụ si 0.1mm ka 100mm.
Inconel 602CA enweghị nkebi tube & Welded ọkpọkọ
Ụkpụrụ nha na nha ahaziri iche nwere ike ịmepụta site na anyị na obere ntachi obi
Inconel 602CA Forging Ring
Mgbanaka mgbanaka ma ọ bụ gasket, nha nwere ike ịhazi ya na elu na-egbuke egbuke na nnabata ziri ezi
Inconel 602CA eriri & eriri igwe
Ọnọdụ dị nro na ọnọdụ siri ike na elu AB na-egbuke egbuke, obosara ruru 1000mm
Inconel 602CA Flange
Enwere ike imepụta nha ọkọlọtọ na nha ahaziri iche site na iji nnabata ziri ezi
Kedu ihe kpatara Inconel 602CA?
1. pụtara ìhè iguzogide cyclic oxidation site 2250°F (1232°C)
2.Excellent elu okpomọkụ creep ike
3.Resistant ka carburizing na nitriding gburugburu
4.Highly na-eguzogide oke ọka na ọrụ
5.Superior omume na oxidizing / chloridizing gburugburu
6.Good iguzogide uzuzu ígwè
Inconel 602CA ngwa ubi:
• Calciners maka nhazi ịnweta
• Okpomọkụ na-agwọ muffles na retorts
• Kemịkalụ mwepu mwepu retorts
• Ihe ndozi ọkụ ọkụ
• Nitric acid catalyst na-akwado grids
• Ngwá ọrụ nhazi iko a wụrụ awụ
• Igwe ọkụ ọkụ na-egbuke egbuke
• Carbon fiber mmepụta
Alloys okpomọkụ dị elu, Cossion Resistant Alloys, na ngwaahịa Alloys ndị ọzọ pụrụ iche, anyị nwere ike ịnye n'ụdị dị iche iche nke ndị ahịa ụwa. nwekwara ike ịmepụta dị ka cleints ịbịaru ma ọ bụ nkọwapụta okwukwe anyị bụ na àgwà na ihe ndị ahịa chọrọ bụ ihe mbụ dị mkpa maka mgbe niile. onye ọ bụla nọ na ụlọ ọrụ anyị.
KPỌTỤRỤ ANYỊ:
E-mail：sekonicmetals@gmail.com info@sekonicmetals.comPhone
Ekwentị/whatsapp:0086-15921454807Azụ ahịa: 0086-511-86826607Nkwado: 0056-511-86826608
